PLC-RSC- 12DC/21-21AU

Extract from the online catalog     PLC-RSC- 12DC/21-21AU Order No.: 2967277 The illustration shows the version PLC-RSC- 24DC/21-21 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277   PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with multi-layer contact, for assembly on DIN rail NS 35/7.5, 2 PDT, input voltage 12 V DC   Product notes WEEE/RoHS-compliant since: 02/09/2006 Commercial data GTIN (EAN) 4 017918 163945 sales group G230 Pack 10 pcs. Customs tariff 85364190 Catalog page information Page 83 (IF-2011) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Coil side Nominal input voltage UN 12 V DC Nominal input current at UIN 33 mA Typical response time 8 ms PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 1 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 Typical release time 10 ms Operating voltage display Yellow LED Protective circuit Protection against polarity reversal Polarity protection diode Free-wheeling diode Damping diode Contact side Contact type Single contact, 2-PDT Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Maximum inrush current 50 mA Min. switching current 1 mA (at 24 V) Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V AC/DC Limiting continuous current 6A Maximum inrush current 15 A (300 ms) Min. switching current 10 mA Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 85 W (for 48 V DC) 60 W (for 60 V DC) 44 W (for 110 V DC) 60 W (for 220 V DC) 1500 VA (for 250 V AC) General data Width 14 mm Height 80 mm Depth 94 mm Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Test voltage PDT/PDT 2.5 kV AC (50 Hz, 1 min.) Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 2 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 Operating mode 100% operating factor Mechanical service life 3 x 10 cycles Inflammability class acc. to UL 94 V0 Name Standards/regulations Standards/regulations IEC 60664 7 EN 50178 IEC 62103 Rated surge voltage / insulation 6 kV / Basic isolation Pollution degree 2 Surge voltage category III Mounting position Any Assembly instructions In rows with zero spacing Connection data Connection method Screw connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 Stripping length 8 mm Screw thread M3 Certificates / Approvals Certification PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de CUL, CUL Listed, GL, UL, UL Listed Page 3 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 Accessories Item Designation Description 0801762 NS 35/ 7,5 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm 0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801377 NS 35/ 7,5 V2A UNPERF 2000MM DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver 1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm 1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m 1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm 1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m 1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m 2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation 2966812 FBST 6-PLC BU Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: blue 2966825 FBST 6-PLC GY Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: gray 2966236 FBST 6-PLC RD Single plug-in bridge, Length: 6 mm, Number of positions: 2, Color: red 2967688 FBST 8-PLC GY Single plug-in bridge, Length: 8 mm, Number of positions: 2, Color: gray 2967691 FBST 14-PLC BK Single plug-in bridge, Length: 14 mm, Number of positions: 2, Color: black 2966692 FBST 500-PLC BU Continuous plug-in bridge, Length: 500 mm, Color: blue 2966838 FBST 500-PLC GY Continuous plug-in bridge, Length: 500 mm, Color: gray 2966786 FBST 500-PLC RD Continuous plug-in bridge, Length: 500 mm, Color: red Assembly Bridges PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 4 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 General 2967251 PLC-BSC- 12DC/21-21 14 mm PLC basic terminal blocks with screw connection method, input voltage 12 V DC(without relay or optocoupler) 2966508 PLC-ESK GY Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 2961299 REL-MR- 12DC/21-21AU Pluggable miniature relays, with multi-layer contact, 2 PDT, input voltage 12 V DC 1053001 ZB 10:UNBEDRUCKT Zack strip, unprinted: 10-section, for individual labeling with MPEN, ZB-T or CMS system, sufficient for 100 terminal blocks, for a terminal width of 10.2 mm, color: White 1053014 ZB10,LGS:FORTL.ZAHLEN Zack strip, 10-section, printed horizontally: with the numbers, 1-10, 11-20 etc. up to 991-1000, color: white 5060883 ZB10/WH-100:UNBEDRUCKT Zack strip, unprinted: 10-section, for individual labeling with MPEN, ZB-T or CMS system, large batch, sufficient for labeling 1000 terminal blocks, for a terminal width of 10.2 mm, color: White SZF 1-0,6X3,5 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Marking Tools 1204517 Diagrams/Drawings Diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 5 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 Circuit diagram PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 6 / 7 Aug 19, 2011 PLC-RSC- 12DC/21-21AU Order No.: 2967277 http://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=2967277 Address PHOENIX CONTACT Deutschland GmbH Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 12000 Fax +49 5235 3 41200 http://www.phoenixcontact.de © 2011 Phoenix Contact Technical modifications reserved; PHOENIX CONTACT Deutschland GmbH http://www.phoenixcontact.de Page 7 / 7 Aug 19, 2011